Industrial Coatings
Two-componenthigh-build anti-corrosion polyamide epoxy coating suitable for maintenance andnew construction.
Versatile system thatcan be used as a primer, intermediate coat, or topcoat for the protection ofsteel and a wide variety of substrates.
When used as atopcoat, suitable for indoor and sheltered environments not directly exposed tosunlight — for exterior UV-exposed applications, a compatible PU topcoat mustbe applied over it.
Easy to apply
1 Day Full Dry Time
Available In Multiple Colors
Anti-corrosion
1. Prepare the metal surface by removing rust, grease, and dust through sanding or sandblasting.
2. Mix components (A + B) according to the manufacturer’s specified ratio.
3. Add high-quality thinner in the recommended amount to achieve the required viscosity.
4. Apply 2 or more coats using spray.
5. Allow sufficient drying time between coats.
6. Let the coating fully cure before exposure to service or heavy loads.
7. For outdoor use, apply a Polyurethane Clear Coat for UV protection.
Thin With thinner as needed
6 – 8 m²/L(dependingon surface condition and number of coats).
Touch dry: 4 –6 hours.
Fully dry: 24hours.
Full curing: 7days.
Spray compressor
1 L - 3.7 L - 16 L
hardener for each can
