Industrial Coatings
Two-component solvent-free impregnating epoxy primer with high penetration and chemical resistance. Fills the capillaries of concrete surfaces, providing high mechanical resistance and promoting adhesion of epoxy coatings.
Can be used standalone or as a primer layer before self-leveling or epoxy coating systems in factories, hospitals, laboratories, car parks, and heavy-duty traffic areas.
Easy to apply
EpoFloor
1. Ensure surface is clean, dry, and free from dust, grease, and moisture.
2. Repair cracks and voids before application.
3. Mix components (A + B) at there commended ratio until fully homogenized.
4. Apply with roller, evenly over the substrate.
5. Allow complete drying before applying epoxy topcoats
Thin With thinner as needed
5 – 8 m²/L(depending on substrate condition and number of coats)
Touch dry: 6 –8 hours.
Fully dry: 24hours.
Full curing: 7days.
Special roller for epoxy
3.7 L - 16 L
hardener for each can
